TI-200/7000 Series (PPS/PEEK-based) Disengaging Latch TI grade

Share:


TI-200/7000 Series (PPS/PEEK-based) Disengaging Latch TI grade

Injection Molded Products
Our Injection Molding Division provides precision machinery components and other small, complex products, as well as products with superior resistance to chemicals and wear.

TI-200/7000 Series (PPS/PEEK-based)

Coating Technology Imbibed with Noncohesive Toner that Offers High Heat Resistance and Strength
The TI-200 Series is based on PPS resin, which offers superior heat resistance and flame retardancy, strengthened with special fibers. Its favorable moldability lends itself well for manufacturing with reliably high accuracy. In addition, the series has a superior application to the PTFE coating which makes the toner non-cohesive. The TI-7000 Series is based on PEEK, a resin whose heat resistance is better than that of TI-200, and reinforced by special fibers. Because of this, TI-7000 has a superior application to the PFA coating which improves toner non-cohesiveness much further.

Disengaging Latch Grade Properties Table:

Property Testing Method Unit 240A 7200 8000 7500 5013 550F
Specific gravity D792   1.73 1.47 1.70 1.75 1.40 2.17
Water absorption (24 Hrs) D570 % 0.02 0.02 0.05 0.08 0.33 0.03
Tensile strength D638 MPa 180 98 120 170 186 32
Tensile elasticity D638 % 3.0 3.5 2.1 3.0 15.0 410
Bending strength D790 MPa 270 127 190 280 235  
Bending elasticity D790 GPa 18.0 6.9 12.9 14.0 4.9  
Izod impact strength (notched) D256 J/m 45 25   30 127 Nondestructive
Deflection temperature under load (1.82 MPa) D648 °C >260 >260 >290 >290 278  
Coating     PTFE PTFE PFA PFA PTFE None
Application example(s)     Fixing pawl Fixing pawl Fixing pawl Fixing pawl Fixing pawl
Drum pawl
Fixing pawl

* This is a table of representative examples based on values measured from testing carried out under specific



 Inquiry - TI-200/7000 Series (PPS/PEEK-based) Disengaging Latch TI grade